Adjustable Tack Swivel for ø11 mm AT-Cable, Seldén GX 10

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Adjustable Tack Swivel for ø11 mm AT-Cable, Seldén GX 10This accessory for Seldn GX furlers enables the sailor to easily trim the luff of the gennaker. The Adjustable Tack Swivel slides up and down over the AT cable and is handled from the cockpit with a down haul. As opposed to trimming the luff by slacking the halyard, the AT cable can now be permanently tensioned and always ready for furling. The sliding sleeve of the adjustable tack swivel consists of two halves and therefore it is easy to retrofit the

The fitting is glass fiber reinforced composite with polymer sheaves and a rubber buffer bearing

4 screws needed for furlex 400TD

Upgraded 20 mm single Soft Attachment Block featuring stainless steel sheave for higher working load

This is a 15 mm wide and 600 mm long standard track with holes for M4 fasteners

A six wheel

Breaking Load: 180 kg

Dimensioned for a righting moment at 30° heel of maximum 250 kNm on a masthead rigged monohull yacht and 200 kNm on a fractional rig

If trysail luff length is not available from the yacht designer

This headboard car assembly consists of two IWS 68 cars and a composite headboard toggle with a Drop-nose pin for easy connection with the headboard of the sail

Turnbuckle with Swage Terminal/Toggle terminals

com/products/sail-hardware/

Length: 8 mm

Exchange/Return Notes