Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

700BCA Fluke Adapter NewAdditional Features: Interface cable (calibrator to bar code wand) Size: Overall length approximately 15 cm Material: Black PVC cable and housings, tin plated shells, gold plated copper contacts Instruction sheet in English, French, German, Italian, and Spanish Shielded four conductor cable terminated with a 9 socket D subminiature connector and a 9 pin D subminiature connector. The Fluke 700BCA provides interconnection and pin translation between a

Line/Loop impedance with at high resolution (with optional accessory IMP57)

portable chassis: 330×148×385mm

Agilent Technologies was spun off from Hewlett-Packard in 1999

N2842A or N2843A 10:1 probe supports testing up to 300 Vrms

8 pF tip impedance and a 300 V CAT II rating

Vernier gain in 0

and cable insertion loss

The MS2601J presents 75 Ω with an NC-type connector and is specified for ±0

while 1 GHz models reach 5 GSa/s half-channel

3 A Frequency / Period Range 3 Hz to 500 kHz / 2 µs to 333 ms Temperature - Thermocouple Range -200°C to +1820°C (type-dependent) Temperature - RTD Range -200°C to +630°C Temperature - Thermistor Range -80°C to +150°C Input Protection (DCV) 300 V all ranges Common Mode Voltage 300 V DC or 300 Vrms (425 V peak for AC waveforms) Channel Capacity (Fully Loaded Mainframe) Two-Wire Multiplexer Channels Up to 576 One-Wire Multiplexer Channels Up to 720 One-Pole Matrix Crosspoints Up to 2

Model Bandwidth Analog Channels Digital Channels MSOX3014A 100 MHz 4 16 DSOX3012A 100 MHz 2 — MSOX3012A 100 MHz 2 16 DSOX3014A 100 MHz 4 — Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below

The 2001-TCSCAN provides nine analog channels plus a dedicated cold-junction reference channel for thermocouple work

Exchange/Return Notes