Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Eurorack Prototyping Board (3 pcs)We developed these for prototyping in the Siam Modular workshop; it's is a protoboard that matches the layout of a standard breadboard whilst also fitting nicely into a 14hp space on your eurorack system. The breadboard layout has rails for +12V, 12V and +5V which connect to the power inlet. At the power stage there are component footprints for one series component and two rail to ground components per rail for your protection and filtering

this creates two separate mixers - So the top inputs are mixed and output from the top out

The base-plate of the Shell features two built-in power-bus strips with a total of 27 non-shrouded headers

until the inputs adjacent to outputs are panned almost completely to that output

Omitting the jumper means the CV will be scaled down to 50% so that the parameter will react to CVs of up to 10v

6x expander port jumpers

A complete power solution for eurorack synthesizers comprising of:

With some distortion already applied

it won't output anything with the main knob in the center position

LED indicator lights red while the squarewave is negative (triangle rising phase) and green while squarewave is green (triangle falling)

The top position is the middle setting while the lower position is the longest range – most useful for envelopes

SHORT (No Jumper): 4 ms (250hz) - 0

Includes line-lump transformer