Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

MIXTWOJACKS HW-PTT-M1This PTT (push to talk) cable allows you to send the walkie talkie's audio output to the Mixtwojacks combiner and monitor it through your own headphones. It features a Motorola M1 standard connector, compatible with 2 pin Motorola radios and many other models Check full compatibility on our Radio Connector Chart (click here)

6 mm diameter) and the same rugged cable relief as on our 5 mm mics

supports sample rates up to 96kHz via Audinate's Ultimo chip

Enhanced AF frequency response

this type of capsule is addressed from the side

Use with gear like Sound Devices 633

Some examples of common compatible microphone capsules that can be used with the MTH610:

or from lav microphones wired for standard Lectrosonics 5-pin "servo bias" inputs

gradually dropping off below 60Hz

14 easy-to-access top-panel inputs provide flexible options for microphones

This cable converts a single 4 pin Hirose output into 2 x 4 pin Hirose outputs

LI-ION (LI-POLYMER) BATTERIES CHARGING MODE:

whether you're playing live or rehearsing a set