Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

6220-834 Megger Test Lead NewFeatures: For use with MIT1025 Insulation Tester Set includes black negative test lead that has been screened Supplied with 3 compact, un insulated clips Lead insulation rating: 10 kV Clip capacity: 18 mm Cable length: 9. 8 ft. (3 m) Accessories: 3 Compact Test Clips 3 10 kV Test Leads, 9. 8 ft. (3 m) The Megger 6220 834 is a test lead. The Megger 6220 834 Compact Test Clips are designed for clamping on test pieces where access is limited.

Its internal Cable List holds 64 cable types

The Com-Power CDN-M325E are for testing from 150 kHz - 230 MHz according to the EN 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields

applied differentially or between either input and ground

it allows the output channel can be extended up to 32 channels

400 V RMS CAT I or 400 V DC CAT I

A variable range has been added to allow any intermediate voltage from 10 V to 1000 V in 1 V steps

power) +20 dBm Auto range point (normal mode) –15 dBm Measurement Ranges — Average Only Mode Lower range (min

Because the models differ in supported compensation range rather than headline performance

embedded systems work involving serial buses such as I²C

Within the PQA800 family the differentiator called out in the datasheet's feature-by-model table is voltage spike and fast transient capture: the PQA824 adds detection of voltage spikes on phase-to-ground inputs with 5 microsecond timing resolution

Strand Hook & Shoulder Strap

±1 A / ±3 A

Exchange/Return Notes